Sunday, December 4, 2011

APAD OPENVPN TUTORIAL [wm8650 froyo 2.2]

Posted by vonne at 2:37 AM
Disclaimer:
1. DO IT AT YOUR OWN RISK.
2. This is only tested with specs:
- Android 2.2 Froyo China tablet
- Kernel version: 2.6.32, Build Number: 1.3.1, 1.5.1, 1.5.2, 1.5.3, 1.5.5
- Blue LED at normal, Red LED when at charge
- Black or NO COLOR audio port
- WM8650 8" (officially EKEN M003S)
3. This is NOT repost, it is modified version ng tutorial ni sir cmangalos (TUT: OPENVPN for android + WIFI tethering Application = FREE WALKING WIFI SPOT) to make it clearer and compatible for APAD.

Requirements:
1. OpenVPN Installer v0.2.3(Friedrich Schäuffelhut)
2. OpenVPN Settings0.4.7(Friedrich Schäuffelhut) or
TunnelDroid v0.8.3(Christophe Vandeplas)
I recommend: TunnelDroid - di kasi nagloloko di tulad ng Settings.
3. WM8650 tun.ko
4. OpenVPN config files
5. 100% rooted Apad
6. Android terminal emulator
7. Some bit technical skills
8. 101% of common sense

Procedures:
1. Flash your Apad with custom ROM to make it rooted.
Suggested ROMs:
- UBEROID v6 Final kernel version 1.3.1 (there is v7 but under beta test)
- Modroid v7 kernel version 1.5.1 (rumors: mas mabagal ang 1.5.1 vs. 1.3.1)
- KDroid (di ko pa nagamit)
- Singularity (di ko pa nagamit)
- Vestinious (di ko pa nagamit)
2. Install "OpenVPN Installer"
- Yung mga apk pa lang ha.
3. After installing, Look for OpenVPN Installer (yung nainstall na na application)
3.a. Run OpenVPN Installer
3.b. Click "Install" button (main window)
3.c. Click "Install" button (pop-up window)
3.d. Select "/system/xbin" as target directory
3.e. Select "/system/xbin/bb" as path to ifconfig/route
3.f. Wait until successfully installed, "Binary installed" should be seen in main window
3.f.1. Using root explorer look at this directory
/system/xbin/
- dapat nandyan and "openvpn" na file para masabing successful talaga yung installation
3.f.2. Long press openvpn and select "Permissions"
- put check on ALL checkboxes OR using terminal emulator
su > ENTER > chmod 777 /system/xbin/openvpn > ENTER
3.f.3. At the same directory /system/xbin/
- create a new folder and named it "bb" -->> (system/xbin/bb/)
4. Using terminal emulator, type the following to create a symlinks of APAD system ifconfig and route
4.a. TYPE "su" without quote then ENTER
4.b. TYPE "busybox ln -s /system/bin/ifconfig /system/xbin/bb/ifconfig" without quote then ENTER
4.c. TYPE "busybox ln -s /system/bin/route /system/xbin/bb/route" without quote then ENTER
4.d. TYPE "exit" without quote then ENTER
4.e. Close terminal emulator or press HOME
5. Paste the tun.ko to this directory /lib/modules/
6. Create a folder in SD Card and named it "openvpn" without quote -->> /sdcard/openvpn
7. Paste the config files in that directory you created
8. Connect your 3G broadband to the internet
9. This time, decide what OpenVPN GUI you want to use (OpenVPN Settings or TunnelDroid)
9.a. Using TunnelDroid
9.a.1. Install TunnelDroid apk
9.a.2. Run TunnelDroid
9.a.3. Click Menu and select Preferences
9.a.4. Click Set tun driver path and enter "/lib/modules/tun.ko" with quote
9.a.5. Click Ok and click Back
9.a.6. Long press the VPN config of your choice then select "connect"
- alternative: short press the VPN config of your choice
9.a.7. Wait till your connected, and your done
9.b. Using OpenVPN Settings:
9.b.1. Install OpenVPN Settings apk
9.b.2. Run OpenVPN Settings
9.b.3. Click Menu and select Andvanced
9.b.4. Put a check in Load tun kernel module
9.b.5. Click TUN module settings
- Select insmod in "Load module using"
- Put "/lib/modules/tun.ko" without quoute in Path to tun module
- Click OK
- Press/click Back
9.b.6. Put "/sdcard/openvpn" without quote in Path to configurations
9.b.7. Put "/system/xbin/openvpn" without quote in Path to openvpn binary
9.b.8. Put a check in Fix HTC Routes
9.b.9. Put a check in Show Ads
9.b.10. Press/click Back
9.b.11. Put a check in OpenVPN to make it active
9.b.12. Short press the VPN config of your choice
9.b.13. Wait till your connected, and your done
10. If your successfully connected sa VPN, pwede ka na magbrowse sa internet for free

TROUBLESHOOTING SUGGESTION/POINTERS:
1. Make sure that "ifconfig" and "route" files are in /system/xbin/bb/ directory (please refer to step number 4 above).
1.a. If it happens that "ifconfig" or "route" is not found in /system/xbin/bb/ directory, please look at it on /system/xbin/ directory.
1.a.1. If "ifconfig" is found on /system/xbin/ directory, the seamlinks for ifconfig should be removed from that directory by using terminal emulator.
TYPE "su" without quote then ENTER
TYPE "rm -r /system/xbin/ifconfig" without quote then ENTER
TYPE "exit" without quote then ENTER
Close terminal emulator or press HOME
1.a.2. If "route" is found on /system/xbin/ directory, the seamlinks for route should be removed from that directory by using terminal emulator.
TYPE "su" without quote then ENTER
TYPE "rm -r /system/xbin/route" without quote then ENTER
TYPE "exit" without quote then ENTER
Close terminal emulator or press HOME
1.b. If it happens that "ifconfig" is not seen in /system/xbin/bb/ directory, retry using terminal emulator, type the following to create a symlinks for ifconfig.
TYPE "su" without quote then ENTER
TYPE "busybox ln -s /system/bin/ifconfig /system/xbin/bb/ifconfig" without quote then ENTER
TYPE "exit" without quote then ENTER
Close terminal emulator or press HOME
1.c. If it happens that "route" is not seen in /system/xbin/bb/ directory, retry using terminal emulator, type the following to create a symlinks for route.
TYPE "su" without quote then ENTER
TYPE "busybox ln -s /system/bin/route /system/xbin/bb/route" without quote then ENTER
TYPE "exit" without quote then ENTER
Close terminal emulator or press HOME
2. If by chance you install a new busybox, I am confident that openvpn will not work so please reflash your APAD again.
3. Please make sure that "tun.ko" is properly located/found on /lib/modules/ directory.
4. Please make sure that "openvpn" is properly located/found on /system/xbin/ directory to make sure that "OPENVPN INSTALLER" is properly installed.
5. Try to disconnect and then connect again your 3G and then reconnect again your "openvpn settings" or "tunneldroid".
6. Try rebooting your apad.
7. Try reflashing your apad.
8. Try other ROMs for your apad.
9. Try to review the procedures and settings.

Download Here!!
OpenVPN.zip
Tun ko.rar
OpenVPNSettings.rar
androidterminalemulator.apk

0 comments:

Post a Comment

Link Love

Technology & Computers - Top Blogs Philippines Philippines Blog Directory Blog Directory Top Technology blogs Blog Directory Ping your blog, website, or RSS feed for Free Bloggers - Meet Millions of Bloggers MobTechTunnel Online Marketing
Add blog to our directory.
Related Posts Plugin for WordPress, Blogger...
 

Copyright © 2011 MobTechTunnel | Design by Kenga Ads-template